Toffee delights
- Lister79
- Hyper Poster
- Posts: 2126
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
No worries at all mate.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- Caddy Fan
- Posts: 58
- Joined: Sat Jan 19, 2019 6:05 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: Toffee delights
Hi there ? For you when you did the additional door seals did you go right round the door and it looks like about the 12mm size is that correct thanks for your time Gary
- Lister79
- Hyper Poster
- Posts: 2126
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Hi mate yeah right round the door with the join on the lower edge, remember to put drain holes through the seal at the front on rear otherwise you will collect water on your sill. I used 14mm D seal on mine.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- Caddy Fan
- Posts: 58
- Joined: Sat Jan 19, 2019 6:05 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: Toffee delights
Hi thanks for replying when you say on the rear do you mean the sliding door been looking at mine ( I have a maxi ) and not really sure where to put the extra seal have you got a pic of yours thanks Gary
- Lister79
- Hyper Poster
- Posts: 2126
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Hi mate, no on the front door (I haven’t done the sliding door ) but the front the rear corners on the lower section (where they touch the sill). I’ll try and remember to get some photos at the weekend as the van isn’t currently at my house.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- Caddy Fan
- Posts: 58
- Joined: Sat Jan 19, 2019 6:05 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: Toffee delights
Cheers appreciate that
- james400
- Hyper Poster
- Posts: 1207
- Joined: Sun Sep 17, 2017 8:35 am
- Engine size/power: 1.4 16V Petrol (79bhp)
Re: Toffee delights
Looks as good as mine lol how did you find doing them with the lines ?
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
- Lister79
- Hyper Poster
- Posts: 2126
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Ha ha, the first one wasn’t too bad, I drew parallel lines on the rear foam which I aligned with the top of the handle recess. The second however was a pain in the arse trying to get the spacing to match the first. I think the vertical lines are off slightly, but I still need to put it back together so will see how it looks tonight. Cheers for pointing me where to get the factory material.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- Caddy2k Groupie
- Posts: 12
- Joined: Sat Apr 14, 2018 11:36 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Toffee delights
Lovely van, the changes you've made are really done well.
- james400
- Hyper Poster
- Posts: 1207
- Joined: Sun Sep 17, 2017 8:35 am
- Engine size/power: 1.4 16V Petrol (79bhp)
Re: Toffee delights
No problem mate we are all here to help each other out yes I had the same problem but in the end it come out looking goodLister79 wrote:Ha ha, the first one wasn’t too bad, I drew parallel lines on the rear foam which I aligned with the top of the handle recess. The second however was a pain in the arse trying to get the spacing to match the first. I think the vertical lines are off slightly, but I still need to put it back together so will see how it looks tonight. Cheers for pointing me where to get the factory material.
Sent from my iPhone using Tapatalk
Sent from my SM-G950F using Tapatalk
- Lister79
- Hyper Poster
- Posts: 2126
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Drivers side finished, unfortunately vertical lines are in a slightly different position to the passenger side (was concentrating too much on getting the horizontal lines straight ), but I still think it looks ok so I’ll be leaving it, and if you wave your phone about while looking at the photos you’ll never notice .
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- brooneye
- Hyper Poster
- Posts: 1490
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Toffee delights
Looks good pal
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Lister79
- Hyper Poster
- Posts: 2126
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Cheers mate. Hoping to have it on the road 1st March, I’m both excited and dreading it as there isn’t a spec of dirt on it at the minute.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- brooneye
- Hyper Poster
- Posts: 1490
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Toffee delights
Is there much left to do on it?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Lister79
- Hyper Poster
- Posts: 2126
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
No not really A5 side skirts to fit, possibly windows to tint slightly then just little bits and continue with the polishing.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629