My 1.9tdi Caddy (cheap project)

Show off your caddy
User avatar
Lamby00
100BHP+
Posts: 155
Joined: Tue Dec 03, 2019 6:16 pm
Engine size/power: 1.9 TDI (104bhp)

Re: My 1.9tdi Caddy (cheap project)

Post by Lamby00 » Fri Nov 13, 2020 1:40 pm

Usually takes a few days to a week for the Mods/admins to allow access. Hold tight though, this forum has a wealth of knowledge. I would have never of thought of doing half the mods I’ve done now without it!


Sent from my iPhone using Tapatalk

gi-mendes
Caddy2k Groupie
Posts: 7
Joined: Fri Nov 13, 2020 10:07 pm

Re: My 1.9tdi Caddy (cheap project)

Post by gi-mendes » Sun Nov 15, 2020 10:59 pm

Great build.

Are the touran doorcard easy to swap?

User avatar
Lamby00
100BHP+
Posts: 155
Joined: Tue Dec 03, 2019 6:16 pm
Engine size/power: 1.9 TDI (104bhp)

Re: My 1.9tdi Caddy (cheap project)

Post by Lamby00 » Tue Nov 17, 2020 12:21 pm

I haven't actually got round to putting them on due to being busy and lazy. All it needs is a quick trim around the top of the door cards to fit flush with the interior wingmirror cover thing. Then I suppose its just a case of whacking the door cards back on. - (that's if you already have electric windows installed)

gi-mendes
Caddy2k Groupie
Posts: 7
Joined: Fri Nov 13, 2020 10:07 pm

Re: My 1.9tdi Caddy (cheap project)

Post by gi-mendes » Wed Nov 18, 2020 10:09 pm

Ohhh oke. That sounds easy

They look great. I will check if i can score a cheap one

jonsmiths
Caddy2k Groupie
Posts: 7
Joined: Thu Aug 29, 2019 2:30 pm
Engine size/power: 1.9 TDI (104bhp)

Re: My 1.9tdi Caddy (cheap project)

Post by jonsmiths » Thu Nov 19, 2020 8:16 am

Great build this, love the Scirocco seats, were they just a straight bolt into the touran bases?

User avatar
Lamby00
100BHP+
Posts: 155
Joined: Tue Dec 03, 2019 6:16 pm
Engine size/power: 1.9 TDI (104bhp)

Re: My 1.9tdi Caddy (cheap project)

Post by Lamby00 » Thu Nov 19, 2020 9:57 am

@jonsmiths
Yes straight bolt on mate. Super easy


Sent from my iPhone using Tapatalk

Gibson9
Caddy2k Groupie
Posts: 20
Joined: Sat Apr 26, 2014 3:52 pm
Engine size/power: 1.9 TDI (104bhp)

My 1.9tdi Caddy (cheap project)

Post by Gibson9 » Mon Nov 23, 2020 9:34 pm

Hi Lamby,

Sorry to be a pain! I finally got access to the how to section, and picked up a touran centre console/arm rest(happy days)
I’ve been reading the how to and there is a lot of chat about ‘special nuts and bolts’ for this area here

Image


I’m just wondering if you used the mentioned special hardware of if you were able to use standard nuts/bolts?

Thanks in advance!

User avatar
Lamby00
100BHP+
Posts: 155
Joined: Tue Dec 03, 2019 6:16 pm
Engine size/power: 1.9 TDI (104bhp)

Re: My 1.9tdi Caddy (cheap project)

Post by Lamby00 » Tue Nov 24, 2020 11:52 am

Hello mate, you’ll need number 11, and 13. And number 23 to tidy it up.
Part Numbers:

Bolt 1T0711354
Nut N90321506
Cap 1T0863359B82V (titan black), or 1T0863359B71N (anthracite)

Image


Sent from my iPhone using Tapatalk

User avatar
Lamby00
100BHP+
Posts: 155
Joined: Tue Dec 03, 2019 6:16 pm
Engine size/power: 1.9 TDI (104bhp)

Re: My 1.9tdi Caddy (cheap project)

Post by Lamby00 » Tue Nov 24, 2020 1:15 pm

Fitted some pedal covers today. Thanks to swan for the link :)
Image


Sent from my iPhone using Tapatalk

Post Reply