What did you do to your van today?

[GibboVW]

GTi Seats fitted, with custom UniStrut base Extensions

[ben_faulkner]

beautiful seats, i decided to go with the leather R32's but love the pattern on these seats. what does the extension do?

[S.w.blackwell]

Removed my "MANUAL" and added semi auto "CLIMATIC" controls.

Top controls are the old.
Bottom controls are the new.



I can write a how to if anyone is interested.

Its not the full "CLIMATRONOIC" it simply regulates the air temp but still an improvement in my eyes.

thanks

Steve

[anoneamus]

Definitely interested. Is this a VW or aftermarket part? Is it simply installing this part, or are there other bits involved (sensors, modules etc.)?

Thanks

[maxx007at]

I'm interested too. It is still on my todo list

[S.w.blackwell]

Definitely interested. Is this a VW or aftermarket part? Is it simply installing this part, or are there other bits involved (sensors, modules etc.)?

Thanks

You need a Centre vent sensor and a footwell sensor along with the new controls.

My 2015 van had no default locations so you have to drill a few holes. When I've got the camera downloaded ill write it up.

No modules or coding (but you do need to reset the BCM and CAN gateway errors)

Steve

[S.w.blackwell]

I used 5mm flat top wide angle red leds, I have these from other projects but you can get them from RS, FARNELL, CPC, MAPLIN (don't forget an inline resistor)

Looks good !

Can you say what inline resistor is required pls?

I can have a look but unless you have the same LED the resistance may not be ideal, you should base your resistor on the LED voltage and mA. Plenty of calculators if you google.

Steve

[anoneamus]

You need a Centre vent sensor and a footwell sensor along with the new controls.

My 2015 van had no default locations so you have to drill a few holes. When I've got the camera downloaded ill write it up.

No modules or coding (but you do need to reset the BCM and CAN gateway errors)

Steve

Do you have a part number for the part shown? I would need a different one (as I have heated seats) but there's too many to choose from on the parts list with little to no difference in description. I'm guessing this one is 5K0 907 044 HC (display and control panel with cu for electronically controlled air-conditioning for vehicles with auxiliary heater for vehicles with air quality sensor). Also some part numbers for the sensors would be greatly appreciated (or a link to where you got the info for your mod).

[S.w.blackwell]

Anoneamus.

I'm writing a how to, check that section. Ive not finished because Tapatalk isn't working right now.
The part numbers are there though.

Steve

[shanky887614]

? tapatalk isnt working?

[S.w.blackwell]

Well its not working properly for me. (tapatalk)

It wont insert pictures, it just hangs. Text is fine and reading is fine.

Steve

[shanky887614]

pics always hang, take them with cam outside of tapatalk then put them in through cam symbol

tapatalk crashes sometimes or hangs if you take a pic straight through it

[Caddyshack57]

Can i ask where you got yours? Im wanting a carbon set myself to replace the hack carbon job I did myself

I got mine here fella


http://fityourself.co.uk/en/555612-rhd- ... 90256.html

[S.w.blackwell]

Fitted footwell lights.

RED When driving and Normal lights for door opening.

Here are the brackets I made.

Drivers:-



Passenger:-



Both use existing screws.

Steve

[tovtm]

Do they need coding?