What did you do to your van today?

aerobic247 · Post by **aerobic247** » Fri Dec 18, 2015 5:15 pm

cadmad wrote:Fitted under tray. Would advise anyone who hasn't fitted this to fit it makes a lot of difference to the drive noise.

mine arrived today, I take it not all the bolts and screws are used?

dizzee stuff · Post by **dizzee stuff** » Fri Dec 18, 2015 5:18 pm

Not all are used from the fitting kit but you may need some penny washers for the screws.

aerobic247 · Post by **aerobic247** » Fri Dec 18, 2015 5:21 pm

dizzee stuff wrote:Not all are used from the fitting kit but you may need some penny washers for the screws.

It came with penny washers cheers

dizzee stuff · Post by **dizzee stuff** » Fri Dec 18, 2015 5:26 pm

Funny that mine didn't I had to buy them extra.

cadmad · Post by **cadmad** » Fri Dec 18, 2015 10:28 pm

aerobic247 wrote: mine arrived today, I take it not all the bolts and screws are used?

Yeah u don't need the big silver bolts nor all the screws. Does the dynamat make much difference I contemplated doing the same then thought I'd see how I got on with out it first.

gatecrasher93 · Post by **gatecrasher93** » Sat Dec 19, 2015 1:29 pm

northern8019 wrote:modding prep

mk2 touran mirrors and LED puddles

Northern8019 can you contact me some how, I'm in Cumbria and potentially scored a belter caddy but need some rear seat help :-)

aerobic247 · Post by **aerobic247** » Sat Dec 19, 2015 6:12 pm

cadmad wrote: Yeah u don't need the big silver bolts nor all the screws. Does the dynamat make much difference I contemplated doing the same then thought I'd see how I got on with out it first.

I did need 3 of the m6 (silver) bolts to fix the tray to the sub frame, what a difference that try makes cut the road noise in half

ilz2729 · Post by **ilz2729** » Sat Dec 19, 2015 7:13 pm

cadmad wrote:Fitted under tray. Would advise anyone who hasn't fitted this to fit it makes a lot of difference to the drive noise.

How easy is it to fit and does it come with all the bits?

Andyadams · Post by **Andyadams** » Sat Dec 19, 2015 10:23 pm

How much is the under tray from vw would the sound deadening property's be the same from the rad under tray

cadmad · Post by **cadmad** » Sun Dec 20, 2015 5:56 pm

ilz2729 wrote: How easy is it to fit and does it come with all the bits?

Very easy to fit. Comes with everything you need and some extras as obviously fits on a few different vehicles. I used 2 jacks but you could jack a side at a time.
3 bolts go at the back then think there was 4 screws up each side and 1 at the front.

Simply jack the van up push the small silver clips over the bumper where the screws go, you'll see where they go when u have a look. Fit the 3 bolts first I left them loose to start then fitted the front into the bumper, the fingers go over and under the bumper at the front, then put the screws through the washers and screw it up. 10 min job.

ilz2729 · Post by **ilz2729** » Sun Dec 20, 2015 5:57 pm

cadmad wrote: Very easy to fit. Comes with everything you need and some extras as obviously fits on a few different vehicles. I used 2 jacks but you could jack a side at a time.
3 bolts go at the back then think there was 4 screws up each side and 1 at the front.

Simply jack the van up push the small silver clips over the bumper where the screws go, you'll see where they go when u have a look. Fit the 3 bolts first I left them loose to start then fitted the front into the bumper, the fingers go over and under the bumper at the front, then put the screws through the washers and screw it up. 10 min job.

Thanks matey

aerobic247 · Post by **aerobic247** » Sun Dec 20, 2015 6:08 pm

cadmad wrote: Very easy to fit. Comes with everything you need and some extras as obviously fits on a few different vehicles. I used 2 jacks but you could jack a side at a time.
3 bolts go at the back then think there was 4 screws up each side and 1 at the front.

Simply jack the van up push the small silver clips over the bumper where the screws go, you'll see where they go when u have a look. Fit the 3 bolts first I left them loose to start then fitted the front into the bumper, the fingers go over and under the bumper at the front, then put the screws through the washers and screw it up. 10 min job.

I didn't bother jacking my caddy up, I just drove one side up on to the kerb

danny4646 · Post by **danny4646** » Mon Dec 21, 2015 8:15 am

I can do my first post in this topic now

Fitted touran sport seats
Alloys/Chinese heater controls
Chrome indicator bulbs
Golf gti gear knob and gaitor
New head light switch
Aero style rest wiper blade
Ordered pressed plates
God can you tell I had a pile of parts ready to fit when I got my van

northern8019 · Post by **northern8019** » Mon Dec 21, 2015 11:06 am

gatecrasher93 wrote:

Hows it going mate?
Doesn't look like I can PM you...you need more posts I think
Whereabouts are you

Taxi350 · Post by **Taxi350** » Mon Dec 21, 2015 8:37 pm

Fitted my darkside Devolpments exhaust and lowered it more,

CADDY2K.com