My caddy build and face lift
-
- Hyper Poster
- Posts: 1296
- Joined: Sat Dec 26, 2015 6:07 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: PLYMOUTH
Re: My caddy build and face lift
I have found a way to make it all work but it means stripping the lights down. Doing away with the led set up and building my own led lights and using traditional wiring methods. One light is finished and works fine but I just have not had time to do the other one yet.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- anoneamus
- Hyper Poster
- Posts: 1317
- Joined: Tue Sep 30, 2014 8:11 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Cape Town
Re: My caddy build and face lift
If you have a BCM you can do the proper retrofit. KenTDI140 had to do major workarounds as he is using CECM which doesn't have support for ALS. Your description implies you have either not fitted ALS, or it is not wired/coded correctly. Here is a guide for the retrofit:Pirelli901R wrote: ↑Thu Mar 21, 2019 7:46 pm I'm trying the same thing, I have the same problem, had new bcm 5K0937087 but still no high beam and leds.
https://caddy2k.com/forum/viewtopic.php?f=22&t=25064
-
- Hyper Poster
- Posts: 1296
- Joined: Sat Dec 26, 2015 6:07 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: PLYMOUTH
Re: My caddy build and face lift
The retro fit was not possible on my van as it’s an 07. I would have had to totally fit an 11 plate on loom which is more than I was prepared to do.
I have not fitted als
Sent from my iPhone using Tapatalk
I have not fitted als
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 13
- Joined: Fri Aug 03, 2018 1:52 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: My caddy build and face lift
I can't open topic because I still don't have permission. My Caddy i 2011, I wonder is it big diference in 087A wich I have and 087AC wich I found someone in this forum had proper retrofit?anoneamus wrote: ↑Fri Mar 22, 2019 10:23 am If you have a BCM you can do the proper retrofit. KenTDI140 had to do major workarounds as he is using CECM which doesn't have support for ALS. Your description implies you have either not fitted ALS, or it is not wired/coded correctly. Here is a guide for the retrofit:
https://caddy2k.com/forum/viewtopic.php?f=22&t=25064
- anoneamus
- Hyper Poster
- Posts: 1317
- Joined: Tue Sep 30, 2014 8:11 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Cape Town
Re: My caddy build and face lift
Contribute. Make a topic about your van. This is a give and take forum, so if you want to take you must give. In any case, as long as your BCM is 086 or later (I really don't think it makes a difference which letters follow), it has the necessary support for BiXenon. If your van is 2011 you must have replaced BCM, as 087 was only factory fitted after 2014 AFAIK.Pirelli901R wrote: ↑Fri Mar 22, 2019 9:54 pm I can't open topic because I still don't have permission. My Caddy i 2011, I wonder is it big diference in 087A wich I have and 087AC wich I found someone in this forum had proper retrofit?
- Azz03
- Hyper Poster
- Posts: 777
- Joined: Sat Sep 29, 2018 8:28 am
Re: My caddy build and face lift
Wow is all I can say ken you’ve got an incredible amount of patience and skill love the motivation you have even after trashing the front end you’ve bounced back like it’s nothing top notch mate just a quick one you’ve clearly got a lot of knowledge on engines and how they work lol I’m wondering do you know much about the engine conversions?
Thanks in advance.
Sent from my iPhone using Tapatalk
Thanks in advance.
Sent from my iPhone using Tapatalk
-
- Hyper Poster
- Posts: 1296
- Joined: Sat Dec 26, 2015 6:07 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: PLYMOUTH
Re: My caddy build and face lift
The conversion is the easy bit it’s getting the ecu to work that’s the hard bit and wiring changes.
Although mine is heavily modified it’s still essentially the std 1900 engine so I’m still on my original ecu.
Sent from my iPhone using Tapatalk
Although mine is heavily modified it’s still essentially the std 1900 engine so I’m still on my original ecu.
Sent from my iPhone using Tapatalk
- Azz03
- Hyper Poster
- Posts: 777
- Joined: Sat Sep 29, 2018 8:28 am
Re: My caddy build and face lift
My friend/mechanic was part way through it but sadly passed away so I’m left with an unfinished engine. Was just wondering if I could pm you as I’m stuck with a few things. Thanks for the reply.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Hyper Poster
- Posts: 1296
- Joined: Sat Dec 26, 2015 6:07 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: PLYMOUTH
Re: My caddy build and face lift
I’ll try to help if I can
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Sean1066
- Hyper Poster
- Posts: 2343
- Joined: Wed Oct 24, 2018 11:01 pm
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: Newton abbot Devon
Re: My caddy build and face lift
Hi ken
How did you get your mk7 Golf steering wheel to work?
As I have one but can’t get it to work?
Sent from my iPhone using Tapatalk
-
- Hyper Poster
- Posts: 1296
- Joined: Sat Dec 26, 2015 6:07 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: PLYMOUTH
Re: My caddy build and face lift
If I remember right I moved one wire so that the horn worked the lights don’t work but all the main controls do
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- scatman75
- 200BHP+
- Posts: 264
- Joined: Mon Jan 18, 2016 5:31 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Queensland Australia
- Contact:
Re: My caddy build and face lift
i will be using this built to do my own facelift...
-
- Hyper Poster
- Posts: 1296
- Joined: Sat Dec 26, 2015 6:07 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: PLYMOUTH
Re: My caddy build and face lift
I haven’t done any more to the exterior and I just haven’t had time to get the other headlight modified yet as I have had so many jobs to do on the house and new garage.
I did spend more time fine tuning my tune and I’m now pushing close to 300 bhp.
Sent from my iPhone using Tapatalk
I did spend more time fine tuning my tune and I’m now pushing close to 300 bhp.
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 10
- Joined: Sun Oct 27, 2019 3:56 am
- Engine size/power: 1.9 TDI (104bhp)
Re: My caddy build and face lift
Wow that’s fantastic
Last edited by Doc on Mon Oct 28, 2019 6:22 pm, edited 1 time in total.
Reason: Removed unnecessary quote
Reason: Removed unnecessary quote
-
- Caddy2k Groupie
- Posts: 6
- Joined: Sun Nov 03, 2019 11:44 pm
- Engine size/power: 1.9 TDI (104bhp)
Re: My caddy build and face lift
Very nice job, it looks well. A credit to you
Last edited by Doc on Tue Nov 05, 2019 9:11 pm, edited 1 time in total.
Reason: Removed unnecessary quote
Reason: Removed unnecessary quote