What did you do to your van today?

[Boonalon]

But if you break it down 2 shocks, mounts the kit inc labour aint bad at all


Sent from my iPhone using Tapatalk

[liamcaddy61]

When putting on my private reg on earlier I fitted some bright number lights, cant believe how bright they are

Sent from my SM-G973F using Tapatalk

[Seanick]

@Seanick

Did you weld on the small studs that the clips are fastened in?

I just got my kit and the clips are a very loose fit on the blades. I can slide them through the attachment points on the blade. Was it the same for you? I went back to the dealer and pointed this out but they said there's no other clips?

No m8...just used very small screws and drilled the cill to attach the clips...but yes I had the same issue...I thought it was the wrong clips but they are perfect when fitted....just dont overtighten the screws as the clip doesn't work properly if you do

[Shassen]

Thanks for the tip @Seanick.

[peely]

Today was S5 blades

Sent from my SM-G960F using Tapatalk

Is your van a lwb or swb mate

[AdoleFiddler]

Finally finished carpeting the back! Roof liner also done, just need to wire in some LED spotlihts.

Hiya mate how difficult did you find it? You have any other pictures? Not long started putting silent coat down then I’ve got a thermoliner to go in but not looking forward to it at all

[Giddy]

@AdoleFiddler Well... if you want to do it nice, you have to take your time and not rush. There are some more pictures in my build thread. Took me 3 weekends to do all this carpeting. All these corners and curves are quite tricky. It you have ply lined sides it will be much easier.

[Seanick]

Is your van a lwb or swb mate

It's a SwB m8

Sent from my SM-G960F using Tapatalk

[jackbrehony]

Straight swap? As in, lift old seats off bases and bolt these on...or unbolt old seat, complete with base and the bolt new seat, complete with its base into floor?

As far as I can remember, old seats off bases and new seats in. Changed over seat belt buckles as Audi one was short.

[Golding1994]

Well what a night.

Finishing work and the gym to come home try start the speakers and the drill is broke.

So might as well start with the sanding ready for painting Saturday morningm

I officially have 0% patience...

Sent from my H8216 using Tapatalk

[peely]

It's a SwB m8

Sent from my SM-G960F using Tapatalk

I like the look of them seanick but mine’s a maxi so I’m obviously looking for an estate type of blade

[the swan fiend]

Peely, would the a5 sportback blades fit? Might be worth checking


Sent from my iPhone using Tapatalk

[DeanWhit]

Thought I'd take some advice and make some covers out of the bulkhead I took out. Think they'll look decent once they're carpeted.

Sent from my SM-G930F using Tapatalk

[Seanick]

I like the look of them seanick but mine’s a maxi so I’m obviously looking for an estate type of blade

Yea think they are pretty neat m8... on the s5 they don't actually go all the way along the cill...slightly short on both ends so that might have a similar look on a maxi?... get a measure of what you have vs the blade lengths to give you an idea

Sent from my SM-G960F using Tapatalk

[liamcaddy61]

Had some mk4 lights and touran front carpets supplied and fitted at van lab custom conversions in lichfield

Absolutely class service

Only managed to take pictures in the dark which makes the carpet looks tatty but there not. Really happen with the work that was done.

Just need them coding in now.



Sent from my SM-G973F using Tapatalk