What did you do to your van today?

[Peng]

Vdub-si picture please! Been thinking about a swap!

Sent from my SM-G973F using Tapatalk

[mikeb1810]

Today I filled around the panel that I used to cover where I removed the vent from the top of my van.

Didn't do a fantastic job but at least it shouldn't be too visible on the roof!

Tomorrow is my first go at ply lining!

[petrev]

Forgot to post these the other day

Wheel arch box and Fridge mount.

Still got to seal the edges .....

Sent from my Pixel 3a using Tapatalk

[Semster]

Added one of these today. I had an alpine unit before but hate not having tactile volume controls etc. plus it looks more oem.




Sent from my iPhone using Tapatalk

[Treads]

Added one of these today. I had an alpine unit before but hate not having tactile volume controls etc. plus it looks more oem.




Sent from my iPhone using Tapatalk

I’ve been thinking about one of them. The only thing holding me back is the USB not being out the rear
It does look good. OEM Style


Sent from my iPhone using Tapatalk

[ACalamita]

They're deffo worth it!

There's mixed info about the RCD360 as apparently it's a mix of a newer OEM VW headunit with a cheap front end screen/buttons to fit earlier (PQ?) models which then means it's technically not VW OEM.

Whereas the RCD330 (with the aux input between the SD card and USB) are VW OEM (albeit Chinese market)

I've had a RCD330 in my Scirocco for over a year and it's been pretty much faultless. They do also sometimes need some coding with VCDS.

Have a read of this... before you buy

Oh, you can always relocate the USB to the rear (requires some disassembly and soldering). There's a guide in the link above.

[eph3]

They're deffo worth it!

There's mixed info about the RCD360 as apparently it's a mix of a newer OEM VW headunit with a cheap front end screen/buttons to fit earlier (PQ?) models which then means it's technically not VW OEM.

Whereas the RCD330 (with the aux input between the SD card and USB) are VW OEM (albeit Chinese market)

I've had a RCD330 in my Scirocco for over a year and it's been pretty much faultless. They do also sometimes need some coding with VCDS.

Have a read of this... before you buy

Oh, you can always relocate the USB to the rear (requires some disassembly and soldering). There's a guide in the link above.

Thank you! I was just going to start researching changing from the RDS310 to the RCD330, the link you posted is super helpful.

[C Chis]

You can mod the head unit and pop the usb out the back and into the oem dash mount socket






Sent from my iPad using Tapatalk

[Jayofmx]

DIY job, found a cheap plug for my wiper delete, cost me €2.50, then spayed it myself, think it looks the job.

[Peng]

Fitted these blanking plates today, really happy with the quality and think they look top notch. Made it a lot quieter as well

Sent from my SM-G973F using Tapatalk

[Rigguz]

Remapped from 102 to 165... soo much better!

Having recently changed from a Mk7.5 GTD to the 102 Highline, the power (or lack of) was frustrating. Mega happy now though!

And my new alloys have arrived! Just need to remove the stilts before I get them fitted.

[petrev]

New wheels ...

Sent from my Pixel 3a using Tapatalk

[Jay1182]

Redone the black on the edition 30 style grab handle.




Sent from my iPhone using Tapatalk

Wow iv never seen that before I bet that costs a few bob I got edition 30 mouldings in the basket and their hefty lol
Do you have a part number for this please thanks

Sent from my SM-N976B using Tapatalk

[Caddyluv]

@jay1182

It’s custom made 1 of a kind prototype. It’s on my build thread.


Sent from my iPhone using Tapatalk

[pete3dmunds]

Got around to fitting the touran carpet to the seat conversion and getting a nice join to the rear floor rubber