Peng's Grey Caddy
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
Having a look at fitting these seats, havent got round to it as been away etc. Little metal tab on the end is causing me some grief. Any ideas? Would touran bases solve this completely?
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
-
- Caddy2k Groupie
- Posts: 36
- Joined: Sun May 20, 2018 7:23 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Peng's Grey Caddy
Good morning,
With mine , I cut them off and drilled original bases (there's a how to on here somewhere)
Hope this is of help
Robert
With mine , I cut them off and drilled original bases (there's a how to on here somewhere)
Hope this is of help
Robert
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
Yeah I tried a look but hard with so many seat topics ok so just cut them off, I thought about that originally but didn't know if it would cause issues
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
-
- Caddy2k Groupie
- Posts: 36
- Joined: Sun May 20, 2018 7:23 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Peng's Grey Caddy
Hi,
Done this on the sirocco seats approx. 2 years ago never had a problem (used high tensile bolts and large o/d washers just in case there was an issue)
best of luck
Robert
Done this on the sirocco seats approx. 2 years ago never had a problem (used high tensile bolts and large o/d washers just in case there was an issue)
best of luck
Robert
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
Cheers Robert, will give it a go over the weekend
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
-
- Caddy2k Groupie
- Posts: 36
- Joined: Sun May 20, 2018 7:23 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Peng's Grey Caddy
Hi,
What seats have you got to put in?
just curious
Robert
What seats have you got to put in?
just curious
Robert
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
Picked up a set of VRS seats, loved these when we had the octy vrs
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
-
- Caddy2k Groupie
- Posts: 36
- Joined: Sun May 20, 2018 7:23 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Peng's Grey Caddy
cool,
they'll be a definite improvement on the standard seats
Robert
they'll be a definite improvement on the standard seats
Robert
- Giddy
- Hyper Poster
- Posts: 2152
- Joined: Fri Aug 24, 2018 5:56 pm
- Engine size/power: 1.4TSI
- Location: Gloucestershire, UK
Re: Peng's Grey Caddy
These look great. If you using touran, bases there's a little slot for that pin to go in, at the very front of the base. Mine went straight in without cutting off anything.
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
Ah thats interesting. Thats what I wondered, if touran bases means I would need to make no modifications, I might be better off going for them
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
-
- Caddy2k Groupie
- Posts: 36
- Joined: Sun May 20, 2018 7:23 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Peng's Grey Caddy
hi,
with mine i needed mine sitting a bit lower as i'm a bit of a tall lad and needed to feel like i was sat in the van, not on it if you see what i mean
Robert
with mine i needed mine sitting a bit lower as i'm a bit of a tall lad and needed to feel like i was sat in the van, not on it if you see what i mean
Robert
- Deano334
- Caddy2k Groupie
- Posts: 13
- Joined: Mon Oct 12, 2020 9:00 am
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Peng's Grey Caddy
Pukka van mate, Loving those alloys
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
Just fitted in the VRS seats using the touran bases. As said many times before, straight swap in and fit. Really happy with them and they sit lower than the standard seats
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
I bought this rear light and it didn't work, got a refund from the seller and sent it back but the seller moved address and closed down so it got returned back to me. Does anyone want it for free, just cover postage? Not sure if its any good to anyone or if you could work out how to get it working. If not it'll just go in the bin
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: Peng's Grey Caddy
Wow, Holy thread revival!
Little mishap today, control arm from arm sheared off from the strut on the front. Hoping I can get it tacked back on, if not I guess I best start looking for new struts!
Sent from my SM-G973F using Tapatalk
Little mishap today, control arm from arm sheared off from the strut on the front. Hoping I can get it tacked back on, if not I guess I best start looking for new struts!
Sent from my SM-G973F using Tapatalk