New to me Caddy and central locking

Random Caddy chat.
Not the place for sale or wanted topics.
Lomax
Caddy2k Groupie
Posts: 4
Joined: Tue Apr 05, 2022 2:26 pm

New to me Caddy and central locking

Post by Lomax »

Evening, Unfortunately i can’t see all posts as I am new.

I picked up a 2011 caddy today and it looks to have touran door cards fitted. The windows go up and down fine, but the central locking doesn’t work on the two front doors, the rears lock fine.

Also when I lock off the key the passenger door doesn’t lock.

Can anyone help with some advice?
User avatar
Doc
Not God, just a bellend
Posts: 18787
Joined: Thu Jan 01, 1970 1:00 am
Engine size/power: 2.0TSI EA888 Gen3
Location: Monaghan, Ireland & Derbyshire, UK

Re: New to me Caddy and central locking

Post by Doc »

Welcome to the forum.

Sounds like the typical scenario where someone has fitted old door control modules on a new vehicle. The wiring to the door modules from the locks changed around 2008, if the wire positions are not changed to suit the modules as part of an electric windows retrofit, the locking won't work.
You won't have access yet but the information is in the technical section of the forum for you once you meet the requirements.
Image
Image
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit


All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
Lomax
Caddy2k Groupie
Posts: 4
Joined: Tue Apr 05, 2022 2:26 pm

Re: New to me Caddy and central locking

Post by Lomax »

Many thanks for the reply. I take it I need to post x amount of times to meet that criteria?

I don’t suppose anyone could share the wire arrangement that I need?
Lomax
Caddy2k Groupie
Posts: 4
Joined: Tue Apr 05, 2022 2:26 pm

Re: New to me Caddy and central locking

Post by Lomax »

I found a guide on YouTube, but the problem is someone has been at the wires already and they are not in the correct starting point order.

Would anyone know what white numbered wire goes where into each pin?

That would help me a lot.
Post Reply