Hi, have just had the injectors reconditioned and need the torque setting for the retaining clamp bolts
Can't find this info anywhere, nor can I find a repair manual for the 1.9 L SDI Diesel engine. Car registered in 2003
Any help would be welcome
Ta
Andy
Torque setting for injector clamp bolts
-
AndytheCaddyman
- Caddy2k Groupie
- Posts: 1
- Joined: Sun Mar 31, 2024 3:17 pm
-
frazerk
- Caddy2k Groupie
- Posts: 12
- Joined: Wed Mar 27, 2024 8:52 am
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Torque setting for injector clamp bolts
https://youtu.be/JHpDWA0PqS0
This video suggest 2Nm, then 8Nm, then 270 degrees
Scroll through to approx 17min 48 seconds.
This video suggest 2Nm, then 8Nm, then 270 degrees
Scroll through to approx 17min 48 seconds.