What did you do to your van today?
-
- Caddy Fan
- Posts: 50
- Joined: Thu Jun 22, 2023 9:47 am
- Engine size/power: 2.0 CR TDI (108bhp)
- Location: Merseyside
Re: What did you do to your van today?
Darkside flip kit and b8 shocks fitted to rear as part of the b14 kit. White line rear arb fitted as well
Had to go hunting around for leaf springs on a Saturday before people shut as one snapped in half as soon as I removed the shackle so replaced both sides to be on the safe side.
Give it all a good clean up tomorrow before getting all tightened up and new wheels on
Sent from my iPhone using Tapatalk
Had to go hunting around for leaf springs on a Saturday before people shut as one snapped in half as soon as I removed the shackle so replaced both sides to be on the safe side.
Give it all a good clean up tomorrow before getting all tightened up and new wheels on
Sent from my iPhone using Tapatalk
-
- Caddy Fan
- Posts: 50
- Joined: Thu Jun 22, 2023 9:47 am
- Engine size/power: 2.0 CR TDI (108bhp)
- Location: Merseyside
Re: What did you do to your van today?
Got it dropped today with the new alloys on the rear
Think the bronze bola and blackberry work quite well together
Sent from my iPhone using Tapatalk
Think the bronze bola and blackberry work quite well together
Sent from my iPhone using Tapatalk
-
- Hyper Poster
- Posts: 1967
- Joined: Sun Apr 26, 2015 1:41 pm
- Engine size/power: 1.4TSI
Re: What did you do to your van today?
Finally got around to doing an info video for my Fiamma Low Loader bike carrier conversion.
Not great, but hopefully helpful.
https://youtu.be/KFf8wIakwhY?feature=shared
Not great, but hopefully helpful.
https://youtu.be/KFf8wIakwhY?feature=shared
-
- Hyper Poster
- Posts: 1967
- Joined: Sun Apr 26, 2015 1:41 pm
- Engine size/power: 1.4TSI
Re: What did you do to your van today?
Yay !
Got a new HDPE board to mount my cooker burner on.
Chose a nice Grey Granite board to sort of match the rest of the fittings.
When it arrived I was a little disappointed as it was a bit scratched and had obvious shiny production tool marks
Luckily - A quick rub down with a grey Scotchbrite pad and it looks much better
Half way on this side ... As it arrived on the left of this image Better check it fits now !
Phew
Looks nicer than the blue one, though functionally no different.
Just got to drill a few holes now ...
Got a new HDPE board to mount my cooker burner on.
Chose a nice Grey Granite board to sort of match the rest of the fittings.
When it arrived I was a little disappointed as it was a bit scratched and had obvious shiny production tool marks
Luckily - A quick rub down with a grey Scotchbrite pad and it looks much better
Half way on this side ... As it arrived on the left of this image Better check it fits now !
Phew
Looks nicer than the blue one, though functionally no different.
Just got to drill a few holes now ...
-
- Caddy2k Groupie
- Posts: 3
- Joined: Tue Apr 23, 2024 10:06 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: What did you do to your van today?
Mostly been trying to figure out why my sdi wont start
-
- Caddy2k Groupie
- Posts: 8
- Joined: Thu Apr 18, 2024 4:04 pm
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: Kent
Re: What did you do to your van today?
New caddy owner (14 SWB DSG in red).
I've removed all the old boards in the back, took out the bulkhead, cleaned the inside and run the g900 camera cable to the back door.
Need to work out how to power it next. Then start on sound deadening.
I've removed all the old boards in the back, took out the bulkhead, cleaned the inside and run the g900 camera cable to the back door.
Need to work out how to power it next. Then start on sound deadening.
-
- Caddy Fan
- Posts: 73
- Joined: Sun May 30, 2021 10:13 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: What did you do to your van today?
Fitted new wheels
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Hyper Poster
- Posts: 1967
- Joined: Sun Apr 26, 2015 1:41 pm
- Engine size/power: 1.4TSI
- Bahnstormer
- Twin Turbo poster
- Posts: 372
- Joined: Mon Apr 25, 2022 7:09 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Bournemouth
Re: What did you do to your van today?
Cursed it for making me take the VFR to work in the p*ssing rain . Need to fit a new rear caliper, discs and pads this weekend, if they turn up.
- the swan fiend
- Hyper Poster
- Posts: 5156
- Joined: Sat Feb 18, 2017 10:52 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: What did you do to your van today?
Least you get a bit of weather protection on a VFR mate. Not as much as a caddy though
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Rescue me from the swans in me
-
- Caddy2k Groupie
- Posts: 1
- Joined: Mon Apr 15, 2024 11:32 pm
Re: What did you do to your van today?
Paid for and brought it home! Ex BG 2017 2.0
Plan is to use as a day van once removed all the racking and done the assorted jobs in the back.
Excited to get started but it’ll be a longer term project as I’m not that handy. This forum seems great for advice though, so thanks to everyone who offers up helpful info.
Plan is to use as a day van once removed all the racking and done the assorted jobs in the back.
Excited to get started but it’ll be a longer term project as I’m not that handy. This forum seems great for advice though, so thanks to everyone who offers up helpful info.
-
- Caddy2k Groupie
- Posts: 9
- Joined: Mon Nov 13, 2023 2:28 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: What did you do to your van today?
Finally got some 18s on the van
Sent from my iPhone using Tapatalk