CADDY2K.com

Hi everyone I asked question before but was told to look in useful part numbers
I’ve spent many hours looking but can’t find it

Does any one have part number for side rail with tabs

As the cover I got rattles on existing rail




Sent from my iPhone using Tapatalk

@BradleyB
https://www.caddy2k.com/forum/viewtopic.php?t=518
About 1/3 of the way through the first post under the heading "Parts for the SWB side rail cover".
It's all there.

Sean and mikenorman. Both your lights look amazing.


Sent from my iPhone using Tapatalk

@doc thanks so much
I’m a bit rubbish with forums I have no face book or insta

I’m from the Stone Age

Really appreciate your help mate


Sent from my iPhone using Tapatalk

Pepsi wrote:Sean and mikenorman. Both your lights look amazing.


Sent from my iPhone using Tapatalk

Thanks, it’s a did look amazing for me! Ha. Hit another hurdle with a faulty halo already so re split and replace!


Sent from my iPhone using Tapatalk

Pictures of the Passat CC seats I fitted.

First thing I’ve done to my caddy today is strip out the old ply racking the previous owner had fitted, and I replaced the bottom side door roller as the wheel had sheered off the original one Surprisingly straight forward job to do!

mikenorman wrote: Thanks, it’s a did look amazing for me! Ha. Hit another hurdle with a faulty halo already so re split and replace!


Sent from my iPhone using Tapatalk

Ah mate I bet that’s well frustrating.


Sent from my iPhone using Tapatalk

Pepsi wrote: ↑Wed Nov 06, 2019 8:48 am Sean and mikenorman. Both your lights look amazing.


Sent from my iPhone using Tapatalk

Thanks Pepsi. I think mike’s are a bit special.
@mike sorry to hear that one of you halos is faulty

This was a couple of days ago, but I fitted cruise control stalks.

Dead easy job other than the usual 45 minutes fannying around trying to get the airbag out!


Had a bit of a hickup with the coding as my old software didn't have any coding help for a mk4. I managed to make some educated guesses after pausing and zooming in on youtube videos and got them going in the end. I need to get the MFD working at some point too.

My new wheels turned up, but they arrived wrong. I ordered plain 17x7.5 et40 OE type steels, but the supplier sent these modular ones:


Which I don't mind so much, I have them on my camper van - but they're 17+kg each!


Tomorrow I've got these to fit:



I'm a new member and can't access any guides, do I need to take the driveshaft out of the hub to get it low enough? I fitted a set for a friend a few years ago and have completely forgotten how they all came apart. They're only cheapies, but after putting a set of £1000 Bilsteins on my Ibiza and absolutely hating them, I'm going to give these a go before spending a lot of money!

Made new performance pistons



upload image

This was a pain in the ass:




Verzonden vanaf mijn iPhone met Tapatalk

I gave up and bought another set after trying it , life’s too short for that hassle , but fair play to people that have done it , it will look really good , good luck with getting them back together, that’s another pain in the but

Changed existing green pinstripe to a more vibrant green to match windshield. Stands out more. Done a few days ago.

Sent from my SM-J530F using Tapatalk

Replacing my shiny badges with these


Sent from my iPhone using Tapatalk