McCaddyGascars Build
Posted: Tue Feb 09, 2021 10:27 pm
Hey up all
This is going to be my build thread for my Caddy.
Its a 2015 1.6 Highline bought in Jan. Its on 30k miles and I already love it more than anything I've ever bought.
My cars have only ever been for transporting me places to ride my bike and I've done very little on the front of modding, just servicing and worn part replacing etc.
This caddy has now changed what I think of vehicles.
The build has started. I've no idea if it's mk3 or mk4. Registration sometimes shows mk3, but there's some parts from mk3s that dont fit!
ITS A MK4
Before I started doing anything to it
Once I got it home, out came all the ply lining
Then the flooring...
Cleaned all the panels floor and roof
I took to the wheel arches and started sound deadening them. I had no idea how to even start this apart from stick it on and hope for the best!
This worked out OK. Stuck more the the other wheel arch and then the panels
Now it was time to stuff some Diall insulation from B&Q (3 rolls) for the ceiling, all panel nook and crannies and also behind the drivers / passengers seat of which would be the footwell of rear passenger seats.
Thats done to the best of my abilities, now to carpet the plylining (never done this before either)
I flopped the top over, glued and stick, then folded the other side back on itself and worked down the panel. The corners where the hardest.
Carpeted the ceiling and walls so I then done all the panels that I removed before putting them back on. I like carpeting squares.
I didn't take a picture but I used Noico for the floor sound deadening. Then an acoustic barrier on top, before putting the plywood on that and then installing the carpet. Once I have time I'll edit this with the links to the stuff I bought. No idea what the brown panel tabs are called to order black ones instead. Small job for one evening is to Google this.
I carpeted the plastic cover for the barn doors as I didn't have any paint for it.
]
I'll upload pictures of the finished back soon.
Until then, here's an unfinished pic
I then got these mats aparantly made specifically for a caddy
They look and felt poor quality, so they went back and I got proper ones.
I've since installed some Caddy scuff protectors from Vanstyle
I put up the led profiles but the cables just dangle down for now. Haven't decided if I'm going to use a separate battery or hardwire in.
I also ordered some side repeaters and fitted them up in around 5 minutes.
https://youtu.be/YW2lRofjOsM
Got a few things happening this week, so will take pictures and post up again.
I've never done anything before in this post or coming posts, but I'm trying my best.
EDIT:
MOD LIST - rather than shrinking, this will grow
Engine Mods
Stage 1 Remap
Engine Cover Undertray
Engine Bay Cover
Exterior Mods ETC;
Roof Rails
Side Bars (lower)
HEKO wind deflectors
Remove Mossy Suff From Drive Side
Stop Dumbos Tinnitus
Lowering Kit
New 18 Wheels
New 18 Tyres
Gloss Black Handles
Gloss Black Wing Mirrors
Black Roof Rails
Gloss Side Rails
Gloss Black Splitter
Gloss Black Front Upper & Lower Grille
Rear Gloss Black VW Badge
Rear Gloss Black Caddy Badge
RearGloss Black TDI Badge
Rear View Camera X
New LIcence Plates Removing Details Of Garage Bought From
Gloss Black Side Strips Or Body Colour Match & Black Low Line Decal
Interior Mods
Speaker Upgrade Inc Tweeters
Amp Upgrade X
Sub Upgrade
Sound Deaden Walls
Sound Deaden Roof
Sound Deaden Floor
Insulate Walls
Insulate Roof
Insulate Floor
LED Hard Wire
Carpet Ply Lining
Install Roof LED Strips
Change Mind on LED Strips and change for spots
W8 Light Install
Wireless Coin Place Charger
Interior handle for rear door
Roof led
Carpet Behind Seats
Sound Deaden Behind Seats
Sound Deaden front Doors
Insulate Doors
Tint Blackout Little Triangle WIndows
Waterproof Seat Covers
Sort Place For Phone
sound deaden bonet
Suspension Mods
lowering
Thanks!
This is going to be my build thread for my Caddy.
Its a 2015 1.6 Highline bought in Jan. Its on 30k miles and I already love it more than anything I've ever bought.
My cars have only ever been for transporting me places to ride my bike and I've done very little on the front of modding, just servicing and worn part replacing etc.
This caddy has now changed what I think of vehicles.
The build has started. I've no idea if it's mk3 or mk4. Registration sometimes shows mk3, but there's some parts from mk3s that dont fit!
ITS A MK4
Before I started doing anything to it
Once I got it home, out came all the ply lining
Then the flooring...
Cleaned all the panels floor and roof
I took to the wheel arches and started sound deadening them. I had no idea how to even start this apart from stick it on and hope for the best!
This worked out OK. Stuck more the the other wheel arch and then the panels
Now it was time to stuff some Diall insulation from B&Q (3 rolls) for the ceiling, all panel nook and crannies and also behind the drivers / passengers seat of which would be the footwell of rear passenger seats.
Thats done to the best of my abilities, now to carpet the plylining (never done this before either)
I flopped the top over, glued and stick, then folded the other side back on itself and worked down the panel. The corners where the hardest.
Carpeted the ceiling and walls so I then done all the panels that I removed before putting them back on. I like carpeting squares.
I didn't take a picture but I used Noico for the floor sound deadening. Then an acoustic barrier on top, before putting the plywood on that and then installing the carpet. Once I have time I'll edit this with the links to the stuff I bought. No idea what the brown panel tabs are called to order black ones instead. Small job for one evening is to Google this.
I carpeted the plastic cover for the barn doors as I didn't have any paint for it.
]
I'll upload pictures of the finished back soon.
Until then, here's an unfinished pic
I then got these mats aparantly made specifically for a caddy
They look and felt poor quality, so they went back and I got proper ones.
I've since installed some Caddy scuff protectors from Vanstyle
I put up the led profiles but the cables just dangle down for now. Haven't decided if I'm going to use a separate battery or hardwire in.
I also ordered some side repeaters and fitted them up in around 5 minutes.
https://youtu.be/YW2lRofjOsM
Got a few things happening this week, so will take pictures and post up again.
I've never done anything before in this post or coming posts, but I'm trying my best.
EDIT:
MOD LIST - rather than shrinking, this will grow
Engine Mods
Stage 1 Remap
Engine Cover Undertray
Engine Bay Cover
Exterior Mods ETC;
Roof Rails
Side Bars (lower)
HEKO wind deflectors
Remove Mossy Suff From Drive Side
Stop Dumbos Tinnitus
Lowering Kit
New 18 Wheels
New 18 Tyres
Gloss Black Handles
Gloss Black Wing Mirrors
Black Roof Rails
Gloss Side Rails
Gloss Black Splitter
Gloss Black Front Upper & Lower Grille
Rear Gloss Black VW Badge
Rear Gloss Black Caddy Badge
RearGloss Black TDI Badge
Rear View Camera X
New LIcence Plates Removing Details Of Garage Bought From
Gloss Black Side Strips Or Body Colour Match & Black Low Line Decal
Interior Mods
Speaker Upgrade Inc Tweeters
Amp Upgrade X
Sub Upgrade
Sound Deaden Walls
Sound Deaden Roof
Sound Deaden Floor
Insulate Walls
Insulate Roof
Insulate Floor
LED Hard Wire
Carpet Ply Lining
Install Roof LED Strips
Change Mind on LED Strips and change for spots
W8 Light Install
Wireless Coin Place Charger
Interior handle for rear door
Roof led
Carpet Behind Seats
Sound Deaden Behind Seats
Sound Deaden front Doors
Insulate Doors
Tint Blackout Little Triangle WIndows
Waterproof Seat Covers
Sort Place For Phone
sound deaden bonet
Suspension Mods
lowering
Thanks!