2008 Ravenna blue caddy build
-
- 200BHP+
- Posts: 275
- Joined: Tue Jun 20, 2023 1:50 am
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
Thanks mateGmancan1 wrote:Looks smart!
Sent from my SM-S908B using Tapatalk
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
I've been waiting for an interior light for a bit but got it painted and out back together.
I did order a white extra fine paint pen to draw the symbols back on, but it just kept smudging, unfortunately. Then I thought I'd just do the white dots, and that leaked, so I might be upgrading to the passat light soon as I think they are engraved.
Sent from my SM-S908B using Tapatalk
I did order a white extra fine paint pen to draw the symbols back on, but it just kept smudging, unfortunately. Then I thought I'd just do the white dots, and that leaked, so I might be upgrading to the passat light soon as I think they are engraved.
Sent from my SM-S908B using Tapatalk
-
- 200BHP+
- Posts: 275
- Joined: Tue Jun 20, 2023 1:50 am
Re: 2008 Ravenna blue caddy build
Defo a labour of love that light. I looked into pulling mine apart nah
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
Pulling what apart the light? It's easy haha I wasn't taking that spring back on when the paint smudged thoughGmancan1 wrote:Defo a labour of love that light. I looked into pulling mine apart nah
Sent from my SM-S908B using Tapatalk
-
- 200BHP+
- Posts: 275
- Joined: Tue Jun 20, 2023 1:50 am
Re: 2008 Ravenna blue caddy build
When i looked at it i seen too many plastic bits to snap and the light itself would have needed masked to show throw the wee settings
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
Ah, it's not so bad mate, never mind about the settings.Gmancan1 wrote:When i looked at it i seen too many plastic bits to snap and the light itself would have needed masked to show throw the wee settings
Sent from my SM-S908B using Tapatalk
-
- 200BHP+
- Posts: 275
- Joined: Tue Jun 20, 2023 1:50 am
-
- Caddy2k Groupie
- Posts: 13
- Joined: Sun Dec 17, 2023 9:15 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: 2008 Ravenna blue caddy build
Looks great. What paint brand etc did you use?
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
The paint I used was the pro xl smoke grey, about 10 pounds cheaper than the upol stuff!RyanCummins wrote:Looks great. What paint brand etc did you use?
Sent from my SM-S908B using Tapatalk
-
- Caddy2k Groupie
- Posts: 13
- Joined: Sun Dec 17, 2023 9:15 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: 2008 Ravenna blue caddy build
Thanks mate
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
Drop links changed for some jom adjustable ones from euro car parts as the ones I put on were rubbing like f##k, all sorted now.
Got some snow foam for Christmas, so I thought I'd give it a go.
Sent from my SM-S908B using Tapatalk
Got some snow foam for Christmas, so I thought I'd give it a go.
Sent from my SM-S908B using Tapatalk
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
Got the microphone put into the touran light and got my gear stick cut down.
Sent from my SM-S908B using Tapatalk
Sent from my SM-S908B using Tapatalk
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
Boring mechanical post.
Tandem pump taken off and rebuilt,
Fuel temperature sensor replaced,
Cam sensor replaced,
N75 valve replaced.
All vac hoses replaced with silcone and breather filter put on.
Next week, it's going in for
Injector seals,
Injector harness
Rocker cover gasket.
Will get back on the good stuff when I've got the engine running right. It's still really struggling on the first start in the mornings.
Sent from my SM-S908B using Tapatalk
Tandem pump taken off and rebuilt,
Fuel temperature sensor replaced,
Cam sensor replaced,
N75 valve replaced.
All vac hoses replaced with silcone and breather filter put on.
Next week, it's going in for
Injector seals,
Injector harness
Rocker cover gasket.
Will get back on the good stuff when I've got the engine running right. It's still really struggling on the first start in the mornings.
Sent from my SM-S908B using Tapatalk
- Billy.2kcaddy
- 100BHP+
- Posts: 169
- Joined: Sat Jul 15, 2023 9:37 am
Re: 2008 Ravenna blue caddy build
Van dropped off to have injector seals and harness done.
Maf was changed for a bosch one as I wasn't too happy when I realised it was a 40 quid cheapy.
Engine stuff nearly out the way, and I've pretty much replaced every sensor and serviced it so it's running perfect before remapping.
Sent from my SM-S908B using Tapatalk
Maf was changed for a bosch one as I wasn't too happy when I realised it was a 40 quid cheapy.
Engine stuff nearly out the way, and I've pretty much replaced every sensor and serviced it so it's running perfect before remapping.
Sent from my SM-S908B using Tapatalk