The Caddy Alloys Thread

Pics from around the web
RY_VW
Twin Turbo poster
Posts: 492
Joined: Sat May 02, 2020 8:37 pm

Re: The Caddy Alloys Thread

Post by RY_VW »

AUSCaddyMaxiLife wrote: Sun Jul 18, 2021 11:41 pm Do you bother with keeping the rolling diameters the same or just use GPS for a speedo?
I have and would advise it, using gps all the time seems like a pain :lol: there lots of combinations for you to keep it the same so your alloy choice wont be limited 8)
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow 8)
RY_VW
Twin Turbo poster
Posts: 492
Joined: Sat May 02, 2020 8:37 pm

Re: The Caddy Alloys Thread

Post by RY_VW »

@Ade16 use https://www.willtheyfit.com/ to see how alloys will sit compared to your existing set up, for 18 and a width of 8j people tend to like a et45 off set, anywhere around that I'm sure you'dbe safe(do double check though), I've got 7.5j and et51 on mine and only stick out an extra 5/6 if I remember correctly so to me its perfect 8) and for your search I'd go for anything under the vag group for what size you want and just see what offsets are. I ended up knowing what models have which offsets and all sorts by the time id finished :lol:
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow 8)
veedubgub
100BHP+
Posts: 194
Joined: Sat Jun 06, 2020 2:12 pm

Re: The Caddy Alloys Thread

Post by veedubgub »

Anyone know what wheels these are?
Image

Sent from my E5823 using Tapatalk

RY_VW
Twin Turbo poster
Posts: 492
Joined: Sat May 02, 2020 8:37 pm

Re: The Caddy Alloys Thread

Post by RY_VW »

@veedubgub

VW Seattle 8)
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow 8)
veedubgub
100BHP+
Posts: 194
Joined: Sat Jun 06, 2020 2:12 pm

Re: The Caddy Alloys Thread

Post by veedubgub »

Thanks

Sent from my E5823 using Tapatalk


Last edited by Giddy on Wed Aug 18, 2021 10:10 am, edited 1 time in total.
Reason: Removed unnecessary quote of previous post
veedubgub
100BHP+
Posts: 194
Joined: Sat Jun 06, 2020 2:12 pm

Re: The Caddy Alloys Thread

Post by veedubgub »

Got one more (sorry)

Anyone able to put a name to these?
Image

Sent from my E5823 using Tapatalk


RY_VW
Twin Turbo poster
Posts: 492
Joined: Sat May 02, 2020 8:37 pm

Re: The Caddy Alloys Thread

Post by RY_VW »

@veedubgub I dont know the style name but theyre vw eos alloys ;)
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow 8)
veedubgub
100BHP+
Posts: 194
Joined: Sat Jun 06, 2020 2:12 pm

Re: The Caddy Alloys Thread

Post by veedubgub »

Thanks again @RY_VW

Possibly Adelaides as i got a few results back with that name when searching for eos wheels


Sent from my E5823 using Tapatalk

Russ74
100BHP+
Posts: 179
Joined: Fri Jul 20, 2018 11:11 pm

Re: The Caddy Alloys Thread

Post by Russ74 »

Fitted these Audi B7 DTM wheels 8J ET 43 with 225/40/18 Tyres Image


Sent from my iPhone using Tapatalk
User avatar
Exuptoy
Twin Turbo poster
Posts: 340
Joined: Wed Aug 25, 2021 10:17 pm
Engine size/power: 1.9 TDI (104bhp)

Re: The Caddy Alloys Thread

Post by Exuptoy »

Only read as far as P20 and so far haven’t seen my rims in here. They’re genuine VW EOS/Passat ET47 7.5x18 Solitudes. Very similar to the 19” R32 rims but the spoke detail is slightly different.
Needs lowering now.

Mine were powder coated in Iodine colour(🤷🏻‍♂️) which is basically a metallic anthracite colour.

Image
Carolthecaddy
Caddy2k Groupie
Posts: 15
Joined: Wed Jul 14, 2021 3:56 am
Engine size/power: 1.6 CR TDI (102bhp)

Re: The Caddy Alloys Thread

Post by Carolthecaddy »

How do I figure out what wheels will fit?
RY_VW
Twin Turbo poster
Posts: 492
Joined: Sat May 02, 2020 8:37 pm

Re: The Caddy Alloys Thread

Post by RY_VW »

@Carolthecaddy use https://www.willtheyfit.com/ for defence with offsets and widths, centre bore is 57.1 and stud pattern is 5x112. I think the most favoured setup is 8j and around et 42 but theres lots of setups people have got on if you have a read through this thread you'll see. I've gone with 7.5j width and et 51 and think it's perfect 8) do you want aftermarket or vw group? If you go vw group most golf,touran,passat,leon,Octavia and the likes will go on 8)
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow 8)
Stricky
Caddy2k Groupie
Posts: 33
Joined: Sun Sep 05, 2021 8:40 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: The Caddy Alloys Thread

Post by Stricky »

Mastakillahkungfu wrote:Only got one photo of banded steels. Image


Sent from my iPhone using Tapatalk
Anyone have any idea of what steels these are and what size they have been banded to?

Cheers Image


Sent from my iPhone using Tapatalk
User avatar
JimBob3000
Caddy Fan
Posts: 64
Joined: Mon Oct 07, 2019 10:54 pm
Engine size/power: 1.6 CR TDI (102bhp)
Location: UK, South West

Re: The Caddy Alloys Thread

Post by JimBob3000 »

Does anyone have any examples of either Mk7 GTI clubsports or Mk6 GTI Edition 35's on a black caddy?
User avatar
Giddy
Hyper Poster
Posts: 2149
Joined: Fri Aug 24, 2018 5:56 pm
Engine size/power: 1.4TSI
Location: Gloucestershire, UK

Re: The Caddy Alloys Thread

Post by Giddy »

@Stricky
Custom banded steel wheels. You can chose pretty much any size you want 15-19"
Caddy 4, Highline, 1.4 TSI
Instagram: @giddywagen
Build thread >>> here <<<
Post Reply